Logo Search packages:      
Sourcecode: csound version File versions  Download package


/*! \class BlitSquare
    \brief STK band-limited square wave class.

    This class generates a band-limited square wave signal.  It is
    derived in part from the approach reported by Stilson and Smith in
    "Alias-Free Digital Synthesis of Classic Analog Waveforms", 1996.
    The algorithm implemented in this class uses a SincM function with
    an even M value to achieve a bipolar bandlimited impulse train.
    This signal is then integrated to achieve a square waveform.  The
    integration process has an associated DC offset but that is
    subtracted off the output signal.

    The user can specify both the fundamental frequency of the
    waveform and the number of harmonics contained in the resulting

    If nHarmonics is 0, then the signal will contain all harmonics up
    to half the sample rate.  Note, however, that this setting may
    produce aliasing in the signal when the frequency is changing (no
    automatic modification of the number of harmonics is performed by
    the setFrequency() function).

    Based on initial code of Robin Davies, 2005.
    Modified algorithm code by Gary Scavone, 2005.


#include "Generator.h"

00034 class BlitSquare: public Generator
  //! Default constructor that initializes BLIT frequency to 220 Hz.
  BlitSquare( StkFloat frequency = 220.0 );

  //! Class destructor.

  //! Resets the oscillator state and phase to 0.
  void reset();

  //! Set the phase of the signal.
    Set the phase of the signal, in the range 0 to 1.
00050   void setPhase( StkFloat phase ) { phase_ = PI * phase; };

  //! Get the current phase of the signal.
    Get the phase of the signal, in the range [0 to 1.0).
00056   StkFloat getPhase() const { return phase_ / PI; };

  //! Set the impulse train rate in terms of a frequency in Hz.
  void setFrequency( StkFloat frequency );

  //! Set the number of harmonics generated in the signal.
    This function sets the number of harmonics contained in the
    resulting signal.  It is equivalent to (2 * M) + 1 in the BLIT
    algorithm.  The default value of 0 sets the algorithm for maximum
    harmonic content (harmonics up to half the sample rate).  This
    parameter is not checked against the current sample rate and
    fundamental frequency.  Thus, aliasing can result if one or more
    harmonics for a given fundamental frequency exceeds fs / 2.  This
    behavior was chosen over the potentially more problematic solution
    of automatically modifying the M parameter, which can produce
    audible clicks in the signal.
  void setHarmonics( unsigned int nHarmonics = 0 );


  void updateHarmonics( void );
  StkFloat computeSample( void );

  unsigned int nHarmonics_;
  unsigned int m_;
  StkFloat rate_;
  StkFloat phase_;
  StkFloat p_;
  StkFloat offset_;


Generated by  Doxygen 1.6.0   Back to index